South Jersey comfort, made clearer

A more comfortable home begins with a better path.

Explore PSE&G equipment incentives, whole-home comfort improvements, and illustrative 0% payment options with a local team that can make the next step feel simple.

Find my starting point See payment examples
  • PSE&G participating contractor
  • Burlington & Camden County focus
  • Free fit check, no obligation
Family enjoying a bright, comfortable home
Comfort is more than a new box outside. It is how the whole home feels.

01 — Find your path

Start with what your home is telling you.

There is no need to know every program detail first. Choose the situation that sounds most familiar, and Landis will help you turn it into the right conversation.

Illustration of a home's insulation, air sealing, heating, cooling, and water heating systems
One home can have several comfort levers. The point is to see which ones belong in the same plan.

02 — See the difference

Two paths. One easier decision.

Landis does not force every home into the same job. Start with the scope that matches the problem, then verify today’s program terms before work begins.

PSE&G HVAC Instant Rebates

Replace the equipment that needs attention.

A direct Landis HVAC project is often the clearest fit when heating, cooling, or water-heating equipment is the primary issue.

    Illustrative incentives$60 A/C + $540 furnace
    Example payment term84 months at 0% if approved

    03 — Plan the numbers

    Make the tradeoff visible.

    Use the controls to explore a realistic planning illustration. It is not a quote or program approval, but it can make the right questions much easier to ask.

    Build an illustrative project.

    $14,000
    $12,000$16,000
    $6,000
    $5,000$7,000
    −$5,000
    $4,000$7,500

    Build a planning snapshot, not a pre-selected package. Start with a common scenario or choose “I’m not sure” and let Landis identify the right equipment and program path.

    What are you most likely considering?
    The exact indoor/outdoor system match must also meet the published EER2 requirement.
    A common 96% two-stage furnace fits the efficiency band, but existing equipment conditions still matter.
    The listed gas measures require replacing a non-condensing unit. Landis confirms this.
    A tankless model such as Navien NPE-180 needs its exact UEF confirmed.
    Common planning baseline

    2.5T 15.2 SEER2 A/C + common 96% two-stage gas furnace. This is a planning example, not an installed quote.

    $11,500
    Selected published incentive values to review $600 potential

      Landis will verify the AHRI match and the existing gas-equipment condition before confirming eligibility.

      Whole-home figures are assessment-led planning examples. The equipment snapshot uses the PSE&G eligible-measures sheet provided to Landis (effective Jan. 1, 2025; revision shown Aug. 6, 2025) and must be checked against current program rules. It is not a quote, rebate approval, or equipment recommendation.

      Whole Home Energy Solutions illustration

      A broader comfort plan, shown monthly.

      Weatherization and mechanical improvements are considered together after an assessment-led project scope.

      Illustrative monthly payment

      $125/mo

      120-month example term at 0% if approved

      30% potential rebateEstimated balance
      Project total$20,000
      Illustrative rebate−$5,000
      Estimated balance$15,000
      Ask Landis to confirm this path

      Savings explorer

      See why a whole-home conversation can be worth it.

      Choose a planning scenario. Savings are illustrative only; actual energy results depend on the home, measures installed, weather, and how the home is used.

      $2,400
      $1,200$6,000
      Annual planning figure$480
      Monthly planning figure$40
      10-year planning figure$4,800

      At a 20% planning scenario, $2,400 of annual energy spending could be reduced by about $480 per year. Actual savings vary and are not guaranteed.

      04 — Explore the matchups

      The equipment matters. So does the exact match.

      The estimator above helps you build a potential snapshot. These reference cards make the PSE&G listed measures easier to understand without pretending every home gets the same system or rebate.

      Common A/C + furnace

      $600

      A possible starting point.

      15.2 SEER2 A/C plus a common 96% two-stage gas furnace can point to two listed measures—if the AHRI match and existing-unit conditions check out.

      Water-heating choices

      $240–$450

      Tank, tankless, or heat pump.

      Power-vent tanks, qualifying tankless models, indirect tanks, and heat-pump water heaters have different listed measures and conditions.

      Other HVAC pathways

      $300–$1,050

      Heat pumps, boilers, and combis.

      Different system types can have very different listed measures—especially when the home uses radiators, baseboard heat, or an integrated combi.

      The listed values are taken from the PSE&G eligible-measures sheet supplied to Landis, effective Jan. 1, 2025 (revision shown Aug. 6, 2025). PSE&G program terms can change, and the current official program page says final eligibility depends on a participating contractor’s review. Learn more from PSE&G Heating & Cooling offers and Whole Home Energy Solutions.

      05 — Local matters

      The comfort team you see around South Jersey.

      Landis keeps its customer base close for a reason: a familiar local team can respond, plan, and follow through without making the experience feel distant.

      Landis Air Conditioning and Heating service vans
      609-232-2349

      Burlington and Camden Counties are our primary focus, with nearby South Jersey counties served when scheduling and scope are a fit.

      Clear roles. One coordinated comfort plan.

      Landis handles the HVAC equipment path directly. When a home needs weatherization or a whole-home scope, Landis coordinates with B&E Energy Solutions for assessment-led weatherization, Manual J/S, modeling, and program paperwork.

      • Burlington County
      • Camden County
      • Gloucester County
      • Mercer County
      • Ocean County
      • Nearby South Jersey
      Visit the Landis main website

      Your free fit check

      Bring us the home. We will bring the clarity.

      Share a few details and Landis will start with the likely path—not a generic sales script. There is no obligation, and the form is designed to take about a minute.

      1. 1
        Tell us what is going on.Choose the concern, timing, and whether payment options matter to you.
      2. 2
        We review the right starting point.Landis looks at whether the equipment-first or whole-home conversation likely fits.
      3. 3
        You get a clear next step.We confirm current program details before any scope or promise is made.

      Starting point: Home comfort program fit check

      Let’s find the right path.

      1. Home goals
      2. Your details
      What is your main reason for reaching out?
      Are you a PSE&G customer?
      Do you own the home?
      When are you looking to act?
      Are 0% payment options important to you?

      By submitting, you agree that Landis may contact you about your request. Program eligibility, rebates, and financing are subject to current requirements and approval where applicable.

      A few straight answers

      Good questions deserve clear answers.

      The program terms matter. So do the practical details of your home. Here are the questions Landis hears most often before a project begins.

      Will the website tell me exactly what I qualify for?

      No. It is designed to make the options understandable, not to make an approval decision. Actual equipment eligibility, PSE&G account status, project scope, incentives, and payment terms need to be verified before work begins.

      What is the practical difference between the two paths?

      An equipment-first project focuses on the HVAC or water-heating need. A whole-home project begins with an assessment-led view of the equipment, air leakage, insulation, comfort, safety, and sizing questions together.

      Who handles the whole-home weatherization work?

      Landis coordinates the mechanical HVAC scope. B&E Energy Solutions handles the assessment-led weatherization, Manual J/S, modeling, and program paperwork portion when a whole-home project is the right fit.

      Are the payment and savings tools quotes?

      No. They are interactive planning illustrations using the project examples shown on this page. They do not guarantee a price, payment amount, energy savings, program approval, financing approval, or rebate.

      What if I just need heating or cooling help quickly?

      Use the free fit check or call Landis at 609-232-2349. If replacement equipment is the main issue, Landis can start directly with the HVAC path and review available incentive questions with you.

      Call Landis Check my fit